home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Logiciels PC Special 3
/
Logiciel PC - Hors-Serie 3.iso
/
Logs
/
consoles
/
neogeo
/
PKBMame
/
README.TXT
< prev
next >
Wrap
Text File
|
1999-04-07
|
23KB
|
422 lines
M.A.M.E. - Multiple Arcade Machine Emulator
Copyright (C) 1997, 1998, 1999 by Nicola Salmoria and the MAME team
Please note that many people helped with this project, either directly or by
releasing source code that was used to write the drivers. We are not trying to
appropriate merit that isn't ours. See the acknowledgments section for a list
of contributors, however please note that the list is largely incomplete. See
also the CREDITS section in the emulator to see the people who contributed to a
specific driver. Again, that list might be incomplete. We apologize in advance
for any omission.
All trademarks cited in this document are property of their respective owners.
Usage and Distribution License
------------------------------
I. Purpose
----------
MAME is strictly a no profit project. Its main purpose is to be a reference
to the inner workings of the emulated arcade machines. This is done for
educational purposes and to preserve many historical games from the oblivion
they would sink into when the hardware they run on will stop working.
Of course to preserve the games you must also be able to actually play them;
you can see that as a nice side effect.
It is not our intention to infringe any copyrights or patents pending on the
original games. All of the source code is either our own or freely
available. To work, the emulator requires ROMs of the original arcade
machines, which must be provided by the user. No portion of the code of the
original ROMs is included in the executable.
II. Cost
--------
MAME is free. The source code is free. Selling it is not allowed.
III. ROM Images
---------------
You are not allowed to distribute MAME and ROM images on the same physical
medium. You are allowed to make them available for download on the same web
site, but only if you warn users about the copyright status of the ROMs and
the legal issues involved. You are NOT allowed to make MAME available for
download together with one giant big file containing all of the supported
ROMs, or any files containing more than one game each.
You are not allowed to distribute MAME in any form if you sell, advertise or
publicize illegal CD-ROMs or other media containing ROM images. Note that
the restriction applies even if you don't directly make money out of that.
The restriction of course does not apply if the CD-ROMs are published by the
ROMs copyrights owners.
IV. Source Code Distribution
----------------------------
If you distribute the binary, you should also distribute the source code. If
you can't do that, you must provide a pointer to a place where the source
can be obtained.
V. Distribution Integrity
-------------------------
This chapter applies to the official MAME distribution. See next chapter for
limitations on the distribution of derivative works.
MAME must be distributed only in the original archives. You are not allowed
to distribute a modified version, nor to remove and/or add files to the
archive.
VI. Reuse of Source Code
-------------------------
This chapter might not apply to specific portions of MAME (e.g. CPU
emulators) which bear different copyright notices.
The source code cannot be used in a commercial product without a written
authorization of the authors. Use in non commercial products is allowed and
indeed encouraged; however if you use portions of the MAME source code in
your program, you must make the full source code freely available as well.
Derivative works are allowed (provided source code is available), but
discouraged: MAME is a project continuously evolving, and you should, in
your best interest, submit your contributions to the development team, so
that they are integrated in the main distribution. Usage of the
_information_ contained in the source code is free for any use. However,
given the amount of time and energy it took to collect this information, we
would appreciate if you made the additional information you might have
freely available as well.
How to Contact Us
-----------------
The official MAME home page is http://mame.retrogames.com/. You can always
find the latest release there, including beta versions and information on
things being worked on.
Here are some of the people contributing to MAME. If you have comments,
suggestions or bug reports about an existing driver, check the driver's Credits
section to find who has worked on it, and send comments to that person. If you
are not sure who to contact, write to Nicola. If you have comments specific to
a system other than DOS (e.g. Mac, Win32, Unix), they should be sent to the
respective port maintainer (check the documentation to know who he is). DON'T
SEND THEM TO NICOLA - they will be ignored.
Nicola Salmoria MC6489@mclink.it
Mike Balfour mab22@po.cwru.edu
Aaron Giles agiles@sirius.com
Chris Moore chris.moore@writeme.com
Brad Oliver bradman@primenet.com
Andrew Scott ascott@utkux.utcc.utk.edu
Zsolt Vasvari vaszs01@banet.net
DON'T SEND BINARY ATTACHMENTS WITHOUT ASKING FIRST, *ESPECIALLY* ROM IMAGES.
THESE ARE NOT SUPPORT ADDRESSES. Support questions sent to these addresses
*will* be ignored. Please understand that this is a *free* project, mostly
targeted at experienced users. We don't have the resources to provide end user
support. Basically, if you can't get the emulator to work, you are on your own.
First of all, read the docs carefully. If you still can't find an answer to
your question, try checking the beginner's sections that many emulation pages
have, or ask on the appropriate Usenet newsgroups (e.g. comp.emulators.misc) or
on the official MAME message board, http://www.macmame.org/wwwboard/mame/.
For help in compiling MAME, check these pages:
http://zan.emuunlim.com/mame/compile/compilemame.html
http://zan.emuunlim.com/mame/compile/compilemamebeta.html
Also, DO NOT SEND REQUESTS FOR NEW GAMES TO ADD, unless you have some original
info on the game hardware or, even better, own the board and have the technical
expertise needed to help us.
Please don't send us information widely available on the Internet - we are
perfectly capable of finding it ourselves, thank you.
Acknowledgments
---------------
First of all, thanks to Allard van der Bas (avdbas@wi.leidenuniv.nl) for
starting the Arcade Emulation Programming Repository at
http://valhalla.ph.tn.tudelft.nl/emul8
Without the Repository, I would never have even tried to write an emulator.
Unfortunately, the original Repository is now closed, but its spirit lives
on in MAME.
Z80 emulator Copyright (c) 1998 Juergen Buchmueller, all rights reserved.
M6502 emulator Copyright (c) 1998 Juergen Buchmueller, all rights reserved.
I86 emulator by David Hedley, modified by Fabrice Frances (frances@ensica.fr)
M6809 emulator by John Butler, based on L.C. Benschop's 6809 Simulator V09.
M6808 based on L.C. Benschop's 6809 Simulator V09.
M68000 emulator Copyright 1999 Karl Stenerud. All rights reserved.
80x86 M68000 emulator Copyright 1998, Mike Coates, Darren Olafson.
8039 emulator by Mirko Buffoni, based on 8048 emulator by Dan Boris.
T-11 emulator Copyright (C) Aaron Giles 1998
TMS34010 emulator by Alex Pasadyn and Zsolt Vasvari.
TMS9900 emulator by Andy Jones, based on original code by Ton Brouwer.
Cinematronics CPU emulator by Jeff Mitchell, Zonn Moore, Neil Bradley.
TMS5220 emulator by Frank Palazzolo.
AY-3-8910 emulation based on various code snippets by Ville Hallik,
Michael Cuddy, Tatsuyuki Satoh, Fabrice Frances, Nicola Salmoria.
YM-2203 and YM-2151 emulation by Tatsuyuki Satoh.
POKEY emulator by Ron Fries (rfries@aol.com).
Many thanks to Eric Smith, Hedley Rainnie and Sean Trowbridge for information
on the Pokey random number generator.
NES sound hardware info by Jeremy Chadwick and Hedley Rainne.
YM3812 and YM3526 emulation by Carl-Henrik Skσrstedt.
YM2610 emulation by Hiromitsu Shioya.
Background art by Peter Hirschberg (PeterH@cronuscom.com).
Allegro library by Shawn Hargreaves, 1994/97
SEAL Synthetic Audio Library API Interface Copyright (C) 1995, 1996
Carlos Hasan. All Rights Reserved.
Video modes created using Tweak 1.6b by Robert Schmidt, who also wrote
TwkUser.c.
"inflate" code for zip file support by Mark Adler.
Big thanks to Gary Walton (garyw@excels-w.demon.co.uk) for too many things
to mention them all.
Thanks to Brian Deuel, Neil Bradley and the Retrocade dev team for allowing us
to use Retrocade's game history database. [John Butler]
Usage
-----
MAME [name of the game to run] [options]
for example
MAME mspacman -soundcard 0 will run Ms Pac Man without sound
options:
-scanlines/-noscanlines (default: -scanlines)
if the default mode doesn't work with your monitor/video card
(double image/picture squashed vertically), use -noscanlines
or -vesa.
-vesa/-novesa (default: auto)
Decides whether to use tweaked VGA modes or standard VESA modes.
Note that some hires games require VESA modes, -novesa is
ignored in this case.
-ntsc a 288x224 mode with standard NTSC frequencies. You need some
additional hardware (VGA2TV converter) to make use of this.
-vesa1 discontinued. use "-vesa -vesamode vesa1"
-vesa2b discontinued. use "-vesa -vesamode vesa2b"
-vesa2l discontinued. use "-vesa -vesamode vesa2l"
-vesamode vesa1/vesa2b/vesa2l/vesa3
In conjunction with "-vesa", selects the VESA modes to try.
The default is vesa2l.
-resolution XxY
where X and Y are width and height (ex: '-resolution 800x600')
MAME goes some lengths to autoselect a good resolution. You can
override MAME's choice with this option.
You can use -XxY (e.g. -800x600) as a shortcut. Frontend
authors are advised to use -resolution XxY, however.
-320 discontinued. Use -320x240.
If you get an error '320x240 not supported', you probably
need Scitech's Display Doctor, which provides the 'de facto'
standard VESA implementation (http://www.scitechsoft.com)
Note: this is a nice alternative to '-640x480 -noscanlines'
-400 same as above, use -400x300
-512 same as above, use -512x384
-640 same as above, use -640x480
-800 same as above, use -800x600.
-1024 same as above, use -1024x768
-skiplines N / -skipcolumns N
if you run a game on a video mode smaller than the visible area,
you can adjust its position using the PGUP and PGDN keys (alone
for vertical panning, shifted for horizontal panning).
You can also use these two parameters to set the initial
position: 0 is the default, menaing that the screen is centered.
You can specify both positive and negative offsets.
-double/-nodouble (default: auto)
use nodouble to disable pixel doubling in VESA modes (faster,
but smaller picture). Use double to force pixel doubling when
the image doesn't fit in the screen (you'll have to use PGUP and
PGDN to scroll).
-stretch XxY (default: off) stretch low resolution games to fill the screen.
-stretch 1024x768 quadruples pixels horizontally and triples
vertically, -stretch 800x600 triples horizontally and doubles
vertically. 1024x768 will be perfect (for 256x256 games) or
almost perfect (for 256x240 and 256x224 games) without monitor
adjustment, so it is indicated for LCD displays. However, it is
slower than 800x600. 800x600 is faster but the games are
stretched to resolutions varying from 768x448 to 768x512, so they
don't fill the screen and are squashed vertically.
Here's the tip: if your monitor is good enough, you can use the
controls to expand the picture and make it fit perfectly in the
screen. Note that this tip applies not only to stretched modes,
but also to higher resolution games like Lode Runner (384x256)
and the CPS1 games (384x224). The CPS1 games in particular are
unbearably squashed if you don't adjust the monitor.
-depth n (default: 16)
Some games need 65k color modes to get accurate graphics. To
improve speed, you can turn that off using -depth 8, which limits
to the standard 256 color modes.
-gamma n (default: 1.2)
Set the initial gamma correction value.
-vgafreq n where n can be 0 (default) 1, 2 or 3.
use different frequencies for the custom video modes. This
could reduce flicker, especially in the 224x288noscanlines
mode. WARNING: THE FREQUENCIES USED MIGHT BE WAY OUTSIDE OF
YOUR MONITOR RANGE, AND COULD EVEN DAMAGE IT. USE THESE OPTIONS
AT YOUR OWN RISK.
-vsync/-novsync (default: -novsync)
synchronize video display with the video beam instead of using
the timer. This option can only be used if the selected video
mode has an appropriate refresh rate; MAME will otherwise refuse
to start, telling you the actual refresh rate of the video mode,
and the rate it should have.
If you are using a tweaked mode, MAME will try to automatically
pick the correct setting for -vgafreq; you can still override it
using the -vgafreq option. Note: the 224x288 noscanlines mode
doesn't work on most cards. This mode is used by many games,
e.g. Pac Man and Galaga. If it doesn't work on your card, either
use the scanlines version, or don't use -vsync.
If you are using a VESA mode you should use the program which
came with your video card to set the appropriate refresh rate.
Note that when this option is turned on, speed will NOT
downgrade nicely if your system is not fast enough (i.e.:
jerkier gameplay).
-alwayssynced/-noalwayssynced (default: -noalwayssynced)
for many tweaked VGA modes, MAME has two definitions: one which
is more compatible, and one which is less compatible but uses
frequencies compatible with -vsync. By default, the less
compatible definition is used only when -vsync is requested;
using this option, you can force it to be used always.
-ror rotate the display clockwise by 90 degrees.
-rol rotate display anticlockwise
-flipx flip display horizontally
-flipy flip display vertically
-ror and -rol provide authentic *vertical* scanlines, given you
turn your monitor to its side.
CAUTION:
A monitor is a complicated, high voltage electronic device.
There are some monitors that were designed to be rotated.
If yours is _not_ one of those, but you absolutely must
turn it to its side, you do so at your own risk.
******************************************************
PLEASE DO NOT LET YOUR MONITOR WITHOUT ATTENTION IF IT
IS PLUGGED IN AND TURNED TO ITS SIDE
******************************************************
-norotate This is supposed to disable all internal rotations of the image,
therefore displaying the video output as it is supposed to be
(so you need a vertical monitor to see vertical games). However,
many drivers still don't use MAME centralized rotation, but
instead rotate the image on their own, so -norotate has no
effect on them. In some cases, the image will be upside down. To
correct that, use
-norotate -flipx -flipy.
-soundcard n select sound card (if this is not specified, you will be asked
interactively)
-sr n set the audio sample rate. The default is 22050. Smaller values
(e.g. 11025) will cause lower audio quality but faster emulation
speed. Higher values (e.g. 44100) will cause higher audio quality
but slower emulation speed.
-sb n set the audio sample bits, either 8 or 16. The default is 8.
16 will increase quality with certain games, but decrease speed.
This is a software setting, not hardware. The sound card will
always be used in 16 bit mode, if possible.
-stereo/-nostereo (default: -stereo)
enables stereo output for games supporting it.
-volume n (default: 0) set the startup volume. It can later be changed
using the On Screen Display. The volume is an attenuation in dB,
e.g. "-volume -12" will start with a -12dB attenuation.
-joy n (default: none) allows joystick input, n can be:
0/none - no joystick
1/standard - normal 2 button joystick
2/dual - dual joysticks
3/button4 - Stick/Pad with 4 buttons
4/button6 - Stick/Pad with 6 buttons
5/button8 - Stick/Pad with 8 buttons
6/fspro - CH Flightstick Pro
7/wingex - Wingman Extreme
- Wingman Warrior without spinner
8/sidewinder - Microsoft Sidewinder (up to 4)
9/gamepadpro - Gravis GamePad Pro
sneslpt1 - SNES pad on LPT1 (needs special hardware)
sneslpt2 - SNES pad on LPT2 (needs special hardware)
sneslpt3 - SNES pad on LPT3 (needs special hardware)
Notes:
1) Use the TAB menu to calibrate analog joysticks. Calibration
data will be saved in mame.cfg. If you're using different
joytypes for different games, you may need to recalibrate your
joystick every time.
2) Joystick description by number may not be supported by
future versions of MAME. Use the symbolic name instead.
3) Extra buttons of noname joysticks may not work.
4) the "official" Snespad-Support site is
http://snespad.emulationworld.com
-ym3812opl/-noym3812opl (default: -ym3812opl) use the SoundBlaster OPL chip for
music emulation of the YM3812 chip. This is faster, and is
reasonably accurate since the chips are 100% compatible. However,
the pitch might be wrong. Also note that with -no3812opl you need
some external drum samples.
-log create a log of illegal memory accesses in ERROR.LOG
-help, -? display current MAME version and copyright notice
-list display a list of currently supported games
-listfull display a list of game directory names + description
-listroms display selected game required roms
-listsamples display selected game required samples
-listdetails display a detailed list of drivers and the hardware they use
-listgames list the supported games, year, manufacturer
-listinfo list comprehensive details for all of the supported games
-listclones list all clones of the specified game
-verifyroms check selected game for missing and invalid ROMs.
-verifysamples check selected game for missing samples.
-romdir specify an alternate directory/zip name where to load the ROMs
for the specified game. E.g. "mame pacman -romdir pachack" will
run the Pac Man driver but load the roms from the "pachack" dir
or "pachack.zip" archive.
-mouse/-nomouse (default: -mouse) enable/disable mouse support
-frameskip n (default: auto)
skip frames to speed up the emulation. The argument is the number
of frames to skip out of 12. For example, if the game normally
runs at 60 fps, "-frameskip 2" will make it run at 50 fps, and
"-frameskip 6" at 30 fps. Use F11 to check the speed your
computer is actually reaching. If it is below 100%, increase the
frameskip value. You can press F9 to change frameskip while
running the game.
When set to auto (the default), the frameskip setting is
dynamically adjusted at run time to display the maximum possible
frames without dropping below 100% speed.
-antialias/-noantialias (default: -antialias)
antialiasing for the vector games.
-beam n sets the width in pixels of the vectors. n is a float in the
range of 1.00 through 16.00.
-flicker n make the vectors flicker. n is an optional argument, a float in
the range 0.00 - 100.00 (0=none 100=maximum).
-translucency/-notranslucency (default: -translucency)
enables or disables vector translucency.
-cheat Cheats like the speedup in Pac Man or the level skip in many
other games are disabled by default. Use this switch to turn
them on.
-debug Activate the integrated debugger. During the emulation, press
tilde to enter the debugger. This is only available if the
program is compiled with MAME_DEBUG defined.
-profiler Enable the profiler. Press Shift+F11 to show it on screen.
-record name Record joystick input on file INP/name.inp.
-playback name Playback joystick input from file INP/name.inp.
-savecfg no longer supported at the moment
-ignorecfg ignore mame.cfg and start with the default settings
Keys
----
Tab Toggles the configuration menu
Tilde Toggles the On Screen Display
P Pause
F3 Reset
F4 Show the game graphics. Use cursor keys to change set/color,
F4 or Esc to return to the emulation.
F9 Change frame skip on the fly
F10 Toggle speed throttling
F11 Toggle speed display
F12 Save a screen snapshot. The default target directory is PCX, you
have to create it yourself, it will not be created by the program
if it isn't there.
ESC Exit emulator